Meilleur prix
Score du Deal+7
355,70 € 679,00 € ACHETER SUR TOMTOP
ACHETER SUR TOMTOP
Score du Deal+7
355,70 € 679,00 € ACHETER SUR TOMTOP
ACHETER SUR TOMTOP

Imprimante 3D Creality K1 Vitesse max 600mm/s, Acceleration 20000mm/s², volume d’impression 220*220*250mm, Dual-gear direct drive extruder, hotend max 300°C,…

Updated version on Geekbuying

  •  600mm/s Max Speed
  • 20000mm/s² Acceleration
  • 32mm³/s Flow in Full Blast
  •  32mm³/s Max Flow Hotend
  •  Hands-free Auto Leveling
  •  Self-test with One Tap
  •  Solve Ringing with G-sensor
  •  Unibody Die-cast Frame
  •  Auxiliary Cooling Fan in Chamber

Take A Closer Look

Fast, in an Epic Way 

Crazy 600mm/s*. K1 is 12 times faster than a regular FDM 3D printer. Now, sit tight for the thrill of breathtaking speed.
*The 600mm/s speed is achieved at Creality Lab in the Surface Mode with 0.1mm layer height.
*The typical speed is 300mm/s. The travel speed is 800mm/s.

K1, with its stunning speed, will kindle people’s zeal for 3D printing. A fast speed cuts printing time and raises efficiency. It uses less energy for the same output, thus more eco-friendly. Most importantly, it focuses on the pure joy of creation.

Always Print at Full Speed

With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time.

Model Cooling by Dual Fans

A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.

Cooling Effect Comparison

The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.

Creality Print 4.3 with Speed Genes

The latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.

Use before learn it

K1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.

Flexible Build Plate

Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.

Hands-free Auto Leveling

An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don’t need to lift a finger or pay any attention.

Self-test with One Tap

Give a tap, and K1 will self-test the extruder, heatbed, camera (optional), fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without hitch.

Quick-heating Heatbed

The aluminum alloy heatbed spreads heat uniformly and quickly. It reaches 60℃ in only 180s.

Stand Firmly to the Speed Challenge

The unibody die-cast aluminum alloy frame of K1 is CNC machined to be precise and rigid. It enables steady printing at high speed. And the print quality is excellent the whole time.

No Ringing at High Speed

A G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. No more ghosting or ringing on the print.

Connected and Carefree Control

K1 can print via USB drive or WiFi. With a network connection, K1 can be controlled or monitored* remotely from Creality Print or Creality Cloud APP/WEB. Cluster control is also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC.  No more close watch.

Delicate Texture without Z-banding

The upgraded Z-axis with more accurate positioning reduces Z-banding effectively. The texture has never been so subtle.

An Awesome Fit Everywhere

Looking cool and awesome, K1 is the compactest among the FDM 3D printers of a similar build volume. It is an easy fit on your desk or workbench.

K1 Speedy 3D Printer

  • Printing Technology: FDM
  • Build Volume: 220*220*250mm
  • Product Dimensions: 355*355*480mm
  • Package Dimensions: 415*415*550mm
  • Net Weight: 12.5kg
  • Gross Weight: 16kg
  • Printing Speed: ≤600mm/s
  • Acceleration: ≤20000mm/s²
  • Printing Accuracy: 100±0.1mm
  • Layer Height: 0.1-0.35mm
  • Extruder: Dual-gear direct drive extruder
  • Filament Diameter: 1.75mm
  • Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)
  • Nozzle Temperature: ≤300℃
  • Heatbed Temperature: ≤100℃
  • Build Surface: Flexible build plate
  • Leveling Mode: Hands-free auto leveling
  • File Transfer: USB drive, WiFi
  • Display Screen: 4.3″ color touch screen
  • AI Camera: Optional
  • AI LiDAR: Optional
  • Power Loss Recovery: Yes
  • Filament Runout Sensor: Yes
  • Input Shaping: Yes
  • Lighting Kit: Yes
  • Sleep Mode: Yes
  • Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
  • Rated Power: 350W
  • Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
  • Printable File Format: G-Code
  • Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
  • File Formats for Slicing: STL, OBJ, AMF
  • UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese
Nous serions ravis de connaître votre avis

Laisser un commentaire

Nozzler
Logo
Register New Account
Shopping cart