MONOPRICE MP10 Mini
Imprimante 3D- MONOPRICE 134579- MP10 mini. Imprimante 3D FDM surface 200x200mm
The MP10 is a feature rich 3D printer with a heated, flexible, and removable steel spring build plate, and an all metal extruder. It has an assisted level sensor on its magnetic extruder assembly, allowing easy changes to the Z offset in the menu for easy and perfect first layers. Wiring is no issue, as all of the components are already prewired and ready to go, with the connections hidden in the cable management sleeve. The Resume Print funtionality allows a print to be resumed after a power outage, power failure, or a sudden power loss from accidental unplugging.
Features :
- Build Volume: 200x200x180mm
- Material Support: PLA, ABS, PETG, Nylon, Wood Fill, Metal Fill
- Filament Diameter: 1.75mm
- Layer Thickness: 50-300 microns
- Software: Cura, KISSlicer, and Simplify 3D
- Print Speed: up to 100mm/sec
- Input Power: 110-220 VAC, 50/60 HZ
- Dimensions and Weight: 15.7 x 21 x 15.7 inches ( 400 x 533 x 400 mm), 20.9 lbs (9.5 kg)
| 21666 | 15365/21711 | 34438 | 34437 | 33820 | |
| MP Mini Delta3D Printer | MP Select Mini3D Printer V2 | Maker Plus 10 Mini3D Printer | Maker Plus 103D Printer | Voxel Adventurer3D Printer | |
| Build Area | ø100 x 120 mm | 120 x 120 x 120 mm | 200 x 200 x 180 mm | 300 x 300 x 400 mm | 150 x 150 x 150 mm |
| Resolution | 50-200 microns | 100-300 microns | 50-300 microns | 50-300 microns | 100-400 microns |
| Filament Diameter | 1.75mm | 1.75mm | 1.75mm | 1.75mm | 1.75mm |
| Nozzle Diameter | 0.4mm | 0.4mm | 0.4mm | 0.4mm | 0.4mm |
| Hotend Setup | Bowden | Bowden | Bowden | Bowden | Bowden |
| Print Speed | up to 150 mm/sec | up to 55 mm/sec | up to 100 mm/sec | up to 100 mm/sec | up to 100 mm/sec |
| Maximum Extruder Temperature | 260°C | 250°C | 280°C | 280°C | 240°C |
| Maximum Build Plate Temperature | 60°C | 60°C | 110°C | 110°C | 100°C |
| Heated Built Plate | ✔ | ✔ | ✔ | ✔ | ✔ |
| Removable Build Plate | ✔ | ✔ | ✔ | ||
| Filament Sensor | ✔ | ✔ | ✔ | ||
| Calibration | Manual leveling | Manual leveling | Assisted leveling | Assisted leveling | Assisted leveling |
| Camera Monitoring | ✔ | ||||
| Connectivity | Color LCD screen, Micro USB, microSD™ card, Wi‑Fi® | Color touchscreen, Micro USB, microSD™ card, Wi‑Fi® | Touchscreen, Micro USB, microSD™ card, Wi‑Fi® | Touchscreen, Micro USB, microSD™ card, Wi‑Fi® | Color touchscreen, USB drive, Wi‑Fi® |
| Supported Slicing Software | Cura, Repetier-Host | Cura, Repetier-Host | Cura, Repetier-Host, KISSSlicer | Cura, Repetier-Host, KISSSlicer | MP Flashprint, Slic3r, Skeinforge, Cura |
Support Files:
- Quick Install Guide (July 09, 2019)
- User’s Manual (Mar 29, 2019)
- Benutzerhandbuch (Deutsch) (Mar 29, 2019)
- Manual del Usuario (Español) (Mar 29, 2019)
- Manuel d’Utilisation (Français) (Mar 29, 2019)
- Gebruikershandleiding (Nederlandse) (Sep 18, 2019)
- Manuale dell’Utente (Italiano) (Mar 29, 2019)
- Cura for Windows® 64-bit v4.0.0 (May 20, 2019)
Certain filaments that can be used with this product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
SD™ and microSD™ are trademarks of SD-3C, LLC.
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Wi‑Fi® is a registered trademark of Wi‑Fi Alliance.
