Creality CFS for K2 Series and Hi Series x2
Highlights
16 Colors to Enhance Your Creativity
The Creality Filament System (CFS) has a connection hub on the back. By connecting up to four CFS units together, you can print brilliantly in 16 colors, saving the need for additional painting later.
Snapshot Support Is Enabled
The CFS is able to provide model support in different materials. It can be easily broken and is even water-soluble. The generated 3D model will not show any support markings.
Automatic Filament Mapping
The CFS is programmed to communicate seamlessly using Creality 3D printers and Creality Print slicers. It can select from installed filaments based on type and color. As indicated in the G-code file.
Automatic Filament Switching and Relays
The CFS is able to switch filaments smoothly and accurately for multi-color tasks. NOTE: Not compatible with flexible TPU, wet BVOH/PVA or warped cardboard filament spools.
Automatic Runout/Tangle Detection
Sensors are used to monitor each filament reel. It will pause and notify you immediately when the filament runs out or tangles.
Moisture Resistant Filament Storage
The airtight design of the CFS keeps the filament from absorbing moisture from the air. With the help of a desiccant, the filament will remain dry from start to finish. A clear display of temperature and humidity will give you a timely alert if the humidity level is too high.
Cardboard Spool Compatibility
CFS for K2 PLUS 3D Printer is not picky about consumables, it is compatible with Tristar Hyper series, especially Hyper RFID consumables, which can be quickly and automatically recognized
Specification
| General | Brand: Creality Type: Filament System |
| Specification | Filament Slots: 4 Rated Power: 20W Rated Voltage: DC 24V CFS Connections: ≤4 Status Indicators: 4 ( each slot having one) Multicolor 3D Printing: Yes Auto Filament Relay: Yes RFID-tag Reader: Yes Filament Run-out Detection: Yes Filament Buffer: Yes Anti-moisture Storage: Yes with desiccants Compatible Filaments: PLA/ABS/PETG/ASA/PET/PA/CF/PLA – CF; not compatible with damp filaments, not compatible with TPU95A or other flexible filaments Filament Diameter: 1.75±0.05mm Filament Spool Requirement: 1kg spool or any spool with a diameter of 197 – 202mm; spool width: 42 – 68mm |
| Weight & Size | Product Weight: 4.56kg Package Weight: 5.8kg Product Size(L x W x H): 379 x 314 x 276mm Package Size(L x W x H): 438 x 365 x 330mm |
| Package Contents | 2 x Creality Filament System 1 x User Manual |
