Anycubic Mono M7 Pro
Imprimante 3D Anycubic Mono M7 Pro, écran 10,1 pouces 14K Monochrome, contrôle de la température, jusqu’à 170mm/h
Caractéristiques du Produit
● 130mm/h pour les Résines Standard. 170mm/h avec Résine Haute Vitesse, 0.1mm par Couche
● Écran de 10,1 pouces, 14K (13320 * 5120) Système Optique de Haute Précision
● Contrôle de Chauffage par Technologie Auto-Adaptive
● Recharge Automatique, Retrait de la Résine
● Impression Assistée par un Flux de Travail Intelligent
Anycubic Photon Mono M7 Pro
Highlights
Anycubic Photon Mono M7 Pro – Hi-Res Printing with Auto-Refill
The Anycubic Photon Mono M7 Pro has a 10.1-inch monochrome 14k resolution (13,320 x 5,120 pixels) LCD screen with an XY resolution of 16.8*24.8μm. This high resolution, along with 85% light uniformity, ensures detailed and sharp prints on the entire print platform.
One key feature of the M7 Pro is its auto-resin refill system, which automatically manages resin levels, reducing the need for manual monitoring. Anycubic has also included an auto-resin withdrawal feature for easy removal of excess resin before cleaning.
Additionally, the M7 Pro includes an auto-adaptive temperature control system to maintain a consistent air temperature of up to 40°C, ensuring the resin stays above 20°C in cooler environments, similar to the M5S.
- 14K COB LighTurbo 3.0 Source
- 10.1″ Mono LCD
- 170mm/h Max Print Speed
- Auto Resin Refill Syatem
- Dynamic Temp-Control Resin Vat
- Leveling-free
- 223*126*230mm
In addition to the two major upgrades, the printer now has high-speed printing capabilities, reaching speeds of up to 170mm/h when using high-speed resin. This increased speed is made possible by the third-generation high-speed ACF film, which reduces peeling force and height, improving lifting speed compared to the previous version. It is still uncertain whether this film can be retrofitted to the M5S.
For users of resin printers, the constant task of leveling the printer can be tedious. The new model features a leveling-free design, a standard in Anycubic’s high-end models. It utilizes floating platform technology and internal sensors to automatically adjust and ensure consistent printing quality, reducing or eliminating the need for manual leveling. Additionally, there is a smart detection system that identifies resin residue and adjusts peeling height based on the model’s shape, preventing failures and tank film damage from falls or misprints.
Anycubic’s App is a common feature among printers, and it has undergone significant improvements over the past year, offering one-touch printing. Overall, the Anycubic Photon Mono M7 Pro is an exceptional resin 3D printer that delivers high-resolution printing and advanced features for a clear and efficient workflow when properly set up and functioning.
Ultra Fast Speed
Anycubic Photon Mono M7 Pro achieved a high speed of 170mm/h on a 0.1mm layer thickness test using high-speed resin. At the same time, the printing speed of standard resin has been increased to 130mm/h, breaking boundaries and greatly improving printing efficiency, achieving true fast speed printing
High-Precision 14K
With a 14K monochrome LCD screen with 13312*5120 resolution and 16.8×24.8 μm XY resolution, the Photon Mono M7 Pro is capable of printing holes as small as 0.3 mm in diameter, which is more than enough to handle fine printing tasks and make your models stand out.
Advanced COB LighTurbo 3.0
The COB light source system, combined with Fresnel lenses and front-facing reflectors can reach the light angle within 3°, and light uniformity is more than 90%. Anycubic LighTurbo 3.0 is also equipped with a light-off compensation algorithm, which ensures that every layer of the model is successfully exposed and successfully removed from the mold, and improves the printing success rate.
Upgraded Assisted Features
Dynamic temperature control resin vat will adjust the temperature of the resin material to maintain the optimal print temperature at all times for print success. And resin auto-fill feature allows for automatic filling and one-key recycling of remaining resin
Intelligent Design
On the basis of component connection status detection, residue detection, resin level Detection, failed print detection, and release film lifespan management, Photon Mono M7 Pro has added platform installation status detection. 6 types of intelligent detection can achieve startup detection, simplify printing process, and reduce problems caused by misoperation
Specification
| General | Brand: Anycubic Type: Resin 3D Printer Model: Photon Mono M7 Pro Color: Black |
| Specification | Machine Leveling: Leveling-free Light Source: LighTurbo 3.0 (COB+Fresnel Lens) Slicing Software: Anycubic Slicing, CHITU, Tango (CHITU and Tango can be supported around the end of May) Printing Volume: 223*126*230mm Z Axis: Type T (Transport Ball Screw) Build Platform: Laser-carved Plate Material: Compatible with kinds of resin (high speed, water-washable, standard, ABS-like, plant-based, etc.) Printing Speed: Standard Resin 0.1mm layer height: Max. 130mm/h High-Speed Resin 0.1mm layer height: Max. 170mm/h LCD Screen Size: 10.1″, 14K (13320 * 5120) Operating Screen: 5″ IPS Touch-control Light Intensity: 5500±10%uW/cm2 Light Uniformity: ≥90% |
| Weight & Size | Product Weight: 12.8kg Package Weight: 15.8kg Product Size(L x W x H): 31×31.5x52cm Package Size(L x W x H): 62×39.5x39cm |
| Package Contents | 1 x Resin 3D Printer 1 x Print Platform 1 x Resin Vat 1 x User Manual 1 x Screen Protector Kit 1 x Leveling Paper 1 x Auto-fill Unit 1 x Air Purifier 1 x Protective Equipment 5 x Funnels 2 x Scrappers 1 x Hex Key Set 1 x USB Drive 1 x WiFi Antenna 1 x Power Cord |
