SUNLU PLA+ 3kg
SUNLU Filament PLA+ 1.75mm 3KG, Neatly Wound, Filament pour Imprimante 3D, Filament PLA Plus Résistant, Precisione Dimensionale +/- 0.02mm, Bobina da 1kg (2.2 LBS)
SUNLU Filament PLA+ 1.75mm 3KG, Neatly Wound, Filament pour Imprimante 3D, Filament PLA Plus Résistant, Precisione Dimensionale +/- 0.02mm, Bobina da 1kg (2.2 LBS)
À propos de l’article SUNLU PLA+ 3kg
- ➽【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength；lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
- ➽【1.75mm 3KG Pack Vacuum Pack PLA + Filament】 3kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
- ➽【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 3KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
- ➽【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Description du produit
SUNLU Neatly Wound Filament PLA PLUS Pour Imprimante 3D
Produits d’impression 3D recommandés par SUNLU
| PLA Meta Filament | ABS Filament | SILK Filament | S1 PLUS Filament Dryer | S2 Filament Dryer | S9 PLUS Imprimante 3D | |
| Caractéristiques | Filament Fort | Filament Durable | Filament Brillant | Filament Sec | Filament Sec | Détection des Bouchons |
| Couleur | Noir | Blanc | Argent | Noir | Noir | Noir Imprimante+Blanc Séchoir |
| Poids | 1KG | 1KG | 1KG | 0.96KG | 1.11KG | 11.56KG + 0.96KG |
| Diamètre | 1.75 ± 0.02mm | 1.75 ± 0.02mm | 1.75 ± 0.02mm | 1.75/2.85/3.00mm | 1.75/2.85/3.00mm | 1.75/2.85/3.00mm |
| Température Sèche | 45-50℃ | 50-55℃ | 45-50℃ | 35℃-55℃ | 35℃-70℃ | / |
| Taille du Produit | 196(L)×61(W)×196(H) mm | 196(L)×61(W)×196(H) mm | 196(L)×61(W)×196(H) mm | 271(L)×100(W)×237(H)mm | 265(L)×274(W)×118(H) mm | 600(L)×490(W)×640(H) mm |
| Impression Taille | / | / | / | / | / | 310(L)×310(W)×400(H) mm |
