SCULPFUN S30 Ultra 33W + Bed + Roller + Enclosure
SCULPFUN S30 Ultra 33W Laser Cutter + 660*660mm Laser Bed + Rotary Roller + Enclosure
Highlights
SCULPFUN S30 Ultra 33W Laser Engraver Cutter Main Features
Auto air-assisted, the SCULPFUN S30 Ultra 33W laser engraver sports a giant engraving size of 600*600m. Coupling an upgraded linear guide rail with a 33W laser module, the S30 Ultra allows you to cut 20mm balsa wood and 15mm plywood separately in one pass.
- 600*600mm Engraving Size
- 0.08×0.10mm Laser Focus
- Automatic Air Assist
- Replaceable Protective Lens
- Upgraded Linear Slide
- Bluetooth
- Emergency Stop
- Key Lock
600x600mm Large Engraving Area
Sporting a large engraving area of 600x600mm, SCULPFUN S30 Ultra allows you to create large-scale engraving or cutting works of your imagination. With an extremely long service life, it is unnecessary to upgrade the structure for future use.
Enhanced 33W Laser Power
S30 Ultra series laser applies 6pcs 6W diodes to deliver 33W laser power. The cutting ability is thus enhanced to a great deal. It will cut 20mm balsa wood and 15mm plywood separately by one pass and is suitable for those pursuing the ultimate speed.
Enhanced 42-bit Stepping Motor
It adopts an enhanced 42-bit stepping motor that provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kg·cm (ordinary machines are 3.1 Kg·cm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
Built-in High-pressure Air-assisted Nozzle
S30 Ultra series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
Replaceable Protective Lens
S30 Ultra series laser engraver uses an innovative replaceable lens, which greatly improves the service life of the laser, and is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power.
Upgraded 32-bit Air-assisted Motherboard
The latest 32-bit motherboard supports an automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
Industrial-grade Cutting Precision
S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
Professional Safety Design
It is equipped with an emergency stop switch and a safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
One Series One Structure
S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, you only need to replace the laser head without any other changes.
Tool Box, Laser Repair Box, Fixed-focus Column Holder
S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
Solid and Durable Frame
Made of high-strength aluminum alloy, its frame can withstand a weight of up to 50kg without damage, which is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.
Note
- Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you’re not around.
- For detailed machine instructions, please refer to the manual for parameter settings.
- When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
- Do not touch the laser with your hands, otherwise, you may burn your hands.
- Please avoid a strong impact on the machine.
- It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.
- Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.
SCULPFUN S30 Ultra – One Step To Achieve The Best Engravings
- 600*600mm Engraving Size – most ideas can be realized.
- 11W/22W/33W Laser Power – new diode technology.
- Upgraded Linear Slide – precise and fast
- Automatic Air Assist – cleaner cuts
600*600mm Engraving Area
SCULPFUN S30 Ultra sports an extra large engraving area of 600x600mm, which saves the trouble of accessorizing an extension kit in the future when large-scale cutting is required.
Upgraded Safety
SCULPFUN S30 Ultra is dotted with an emergency switch that will stop the machine immediately once you press it. Pulling out the key, the machine will not be turned on, preventing children from turning it on by mistake.
Easy To Upgrade
SCULPFUN S30 Ultra machine structure is almost perfect, no upgrades are required and can be used for a long time. When upgrading the laser power in the future, users only need to replace the laser head, other parts replacements are required.
*SCULPFUN S30 Series use the same structure, cable management, air pump, and power adapters.
SCULPFUN S30 Ultra Series – 3 Power Options
11W – Cut 10mm balsa wood and 6mm plywood in one pass.
22W – Cut 15mm balsa wood and 10mm plywood in one pass.
33W – Cut 20mm balsa wood and 15mm plywood in one pass.
Accessories That Bring Ease To Your Life
Cylinder seat
Laser repair tool
Nozzle clean tool
Automatically Controller Air Assist ( M8)
SCULPFUN S30 Ultra is equipped with an air-assisted 32-bit motherboard and a control-type air pump, which will intelligently control the air assist ON or OFF (Lightburn M8 Air Assist Switch).
33W – Powerful Quad-laser Technology
Single 6W Diode x 6
33W Laser Power
SCULPFUN S30 Ultra 33W laser engraving machine deals with 20 mm thick wood, 18mm thick acrylic, and 0.06mm thick metal with ease. You can also colorize your metal engravings.
Built-in High-Pressure Air-Assist Nozzle
SCULPFUN 30 Ultra 33w nozzle is powered by an advanced fluid mechanics design to better utilize the air pressure. When using the same air compressor, the SCULPFUN S30 Ultra sprays airflow faster.
Replaceable Lens – Long Service Laser
Sculpfun S30 Ultra 33w laser module adopts the replaceable design. After long-term use or if the lens is damaged, it can be replaced to recover the power. This will greatly improve the service life of the laser, which is more than 10 times higher than ordinary lasers.
Laser Repair Kit
Sculpfun S30 Ultra provides a free laser repair kit in the package, including a lens, sealing ring, tweezers, screws, and wrench, when your laser has a problem, it can be repaired in time and thus greatly extends the service life.
Upgraded 0.005mm high-precision heavy-duty linear guide
Upgraded 0.005mm high precision heavy-duty linear guide rail allows SCULPFUN S30 Ultra to move quickly, smoothly, and accurately. Moreover, it bears more weight.
Back Opening Window Design
Helps blow the smoke to the back quickly.
HD Protection Glass
Effectively blocks the dazzling light. Convenient for observation.
32-Bit Air Assist Mainboard
SCULPFUN S30 Ultra motherboard supports the automatic air assist control function ( Lightburn M8 Switch) and reserves the SD Card offline control function. ( Sold separately as an upgrade kit. )
Upgraded 4.2kg.cm Stepper Motor
Strengthened 4.2 Kg- cm 42-bit step motor provides sufficient power to expedite the movement of the machine.
Automatic Air Pump In The Package
SCULPFUN S30 Ultra comes with a durable automatic air pump in the package that outputs 30L/min airflow steadily. It works with the 32-bit air assist mainboard to avail the automatic air assist (Lightburn M8 Air Assist).
Specification
| General | Brand: SCULPFUN Type: Laser Engraver Model: S30 Ultra 33W Color: Blue |
| Specification | Laser Information: Diode Laser Output Power: 33W (this is light energy, not electrical energy) Laser Focus: 0.08×0.10mm Laser Wavelength 455±5nm Focusing Method: fixed focus column + sliding device Laser Protective Cover: Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.Machine Information: Engraving Accuracy: 0.005mm Engraving Area Size: the standard version is 600x600mm Machine Electric Power: about 156W Machine Size: External Size: 800x840mm (include the Motherboard Shell and X-axis Gantry Beam); 750x800mm (Beam Frame) Internal Size: 700x760mm (inner Frame Size) 600x600mm (Working Area) Height: 80mm (Beam Frame)220mm (Include X-axis Gantry Beam)Air Pump: Type: main board controlled air pump Voltage: 24V Flow Rate: 30L/min Air Hose Inner Diameter: 7.5mmMotherboard: 32-bit air-assisted motherboard, supports Bluetooth wireless connection.Engravable/Cutting Material: Carving Materials: all kinds of wood (including walnut, cherry wood, and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone Cutting Materials: all kinds of wood (including walnut, cherry wood, and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boardsOperating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF, and other picture formats. Data Transmission Method: USB connection or Bluetooth wireless connectionPower Input: 220V AC, 50Hz Power Output: 24V 7A |
| Weight & Size | Package Weight: 9.9kg Package Size(L x W x H): 86.8x25x24cm |
| Package Contents | 1 x S30 Ultra 33W Laser Engraver 1 x Laser Shield 1 x Laser Repair Kit 1 x 24V Automatic Air Pump 2 x 460*230*3mm Wood Board 2 x 460*230mm Protective Aluminum Plate 2 x Limit Switch 1 x 24V 7A Power Adapter 1 x Power Cord 1 x USB Cable 1 x Rubber Air Hose 1 x Tool Box 1 x Laser Goggles Step 1-6 Installation Package 1 x X-axis Assembly 2 x X-profiles 2 x Y-profiles 1 x Control Box Assembly 3 x Support Feet 1 x Cable Clamp Bag 1 x Fixed Focus Column Mount 1 x Spare Screw Pack 1 x Non-slip Seat Pack 1 x Rotary Roller 1 x Enclosure 1 x 660 x660mm Laser Bed 1 x User Manual |