ExpiréFilament PLA WOOD SUNLU 1kg 1.75mm +/-0.02mm
SUNLU 3D Printer Filament PLA, 1.75mm PLA Wood Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool, Wood
SUNLU 3D Printer Filament PLA, 1.75mm PLA Wood Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool, Wood
- ➽【20% WOOD Fibers】SUNLU Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. SUNLU 1kg Wood filament combines real wood fibers, meeting your demands for printing projects of functional parts with wooden texture. made by using this high quality marble PLA filament , 3D projects smooth marble-like surface could definitely create an incredible result!
- ➽【High Precision +/- 0.02mm Tolerance】1.75mm PLA WOOD 3D filament(Tolerance Level : ± 0.02mm). Full 2KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
- ➽【1.75mm 1KG Pack Vacuum Pack PLA Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
- ➽【High Compatiblity &100% Enviromental Material】Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Descriptif technique
| Fabricant | SUNLU |
|---|---|
| Marque | SUNLU |
| Dimensions du colis | 20,8 x 20,8 x 7,2 cm; 1 kilogrammes |
| Couleur | ·pla Fibre de Carbone |
| Type de matériau | PLA Wood |
| Nombre d’unités par article | 1 |
| Taille | Wood 3D Printer filament 1.75mm 1kg |
| Modèle fabricant | SUNLU WOOD 3D Filament 1.75mm LW12D |
| Poids de l’article | 1 Kilograms |
Description du produit
Description du produit
Do you like SUNLU Real WOOD Filament upgrade spool design ? Would you like to try all our SUNLU Upgrade Store 1kg 1.75mm 3D filament？
✓ Wood smell and feel
✓ Low temp.
✓ Low warping
✓ 20% real wood fibre
SUNLU 20% WOOD Fibers Filament Specifications:
Net Weight: 1kg
Color: Real Wood
Material: Wood PLA 3D Printer Filament
Diameter: 1.75mm(Dimensional Accuracy +/- 0.02mm)
Recommended Extrusion/Nozzle Temperature: 190℃ – 220℃(374°F – 428°F )
Material Characteristics:
1.SUNLU Wood Filament 1.75mm is light weight. Printed objects look like the wood, which can nail, drill and engrave.
2.Wood filament is widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
Why can’t the filaments stick to the build bed?
1. Check the temperature setting before printing, WOOD filaments have higher extrusion temperature than that of PLA;
2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Key Words: SUNLU WOOD Filament for 3D Printers, WOOD Filament, WOOD 3D Printer Filament, 3D Printer WOOD Filament, 3D Printer Filament WOOD, 3D Printer filament WOOD, 3D Printer Filament 1.75, 3D Printer Filament, 1.75MM Filament
Clause de non-garantie
Life-Time Service: SUNLU filament will replace another 3D Printer Filament for you if there any problem. Our After-sales service will certainly answer and solve the your questions within 24 hours. As the Wood 1.75mm filament material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
