Bambu Lab A1
Bambu Lab A1 imprimante 3D, volument d’impression 256x256x256mm, auto calibration
- Full-auto Calibration
- Multi-Color Printing (Combo Version)
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
Bambu Lab A1 Combo
- Multi-Color Printing
- Full-auto Calibration
- Active Flow Rate Compensation
- 1-Clip Quick Swap Nozzle
- Active Motor Noise Cancelling
- 256*256*256 mm³ Build Volume
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
A1 Tech Specs
| Item | A1 Specification | |
| Body | Build Volume(W*D*H) | 256*256*256 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm | |
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate |
| Max Build Plate Temperature | 100°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10m/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer | Not Recommended | |
| Sensors | Chamber Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 : 385*410*430 mm³ , Package size : 552*532*320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg A1 Combo : Package size 546*536*420 mm³ , Gross weight (AMS lite included) 14.3 kg | |
What’s in the box
Bambu Lab A1
Spool Holder
Purge Wiper
Build Plate
PTFE Tube*1
Bambu Filament Samples (Random Color)
Stainless Steel Nozzle（pre-installed）
Accessory Box
A1 Combo Add-ons
AMS lite Stand
AMS lite Body
AMS lite Rotary Spool Holder (x4)
PTFE Tube